amiga-news.de - Archive

Archiv 'New hardware and software products'

17.Nov.2019
Amiga Future (Webseite) Amiga 600: Extension board eX601
Under the title link Lotharek offers an extension board called eX601 for the Amiga 600 developed by the Furia developer Boris Krizma which provides 1 MB additional chip RAM, a realtime clock with battery, an extension socket for the Indivision ECS and two clock ports for e.g. the Rapid USB developed by Individual Computers.

The price is 39,48 Euro plus shipping from Poland. (snx) (Translation: dr)

[News message: 17. Nov. 2019, 08:41] [Comments: 0]
[Send via e-mail] [Print version] [ASCII version]

16.Nov.2019 Individual Computers: Pictures of cooling system of ACA1260
Individual Computers has published some first pictures of the announced 68040/68060-based accelerator board which show the cooling system of the board: Obviously the developers chose an active cooling, the fan would have been custom-made for Individual Computers. (cg) (Translation: dr)

[News message: 16. Nov. 2019, 15:32] [Comments: 0]
[Send via e-mail] [Print version] [ASCII version]

16.Nov.2019 Free USB adapter for input device: HID2AMI
Using HID2AMI different USB input devices ("HID", "Human Interface Devices") can be connected to the Amiga. The documentation for the board and the firmware of the adapter which is based on an ARM-micro-controller are available on Github. Occasionally the developer offers a small number of the product for sale. Documenations for printing a case with a 3D printer as well as a hardware compatibility list are also available. (cg) (Translation: dr)

[News message: 16. Nov. 2019, 00:39] [Comments: 0]
[Send via e-mail] [Print version] [ASCII version]

16.Nov.2019 USB interface for reading and writing floppy disks on PC: Greaseweazle
After his Gotek firmware FlashFloppy, Keir Fraser has started another project for reading and writing floppy disks on PC: Similar to Kryoflux, 'Greaseweazle' reads the magnetic layers of the disks independently of the used disk format and saves as much information as possible in a so called "Flux Level Image" in the Supercard-Format (SCP) which enables reading and writing copy-protected disks.

Among others SCP disk images are supported by WinUAE and FS-UAE. Using external tools it is possible to convert them to IPF which is a more known format of the Software Preservation Society. You can also create ADF images - if the disk is not copy-protected.

Greaseweazle consists of a mikro controller board that costs only a few euros which is connected to a disks drive and then via USB to the PC. All required software is available on Github under a free license. (cg) (Translation: dr)

[News message: 16. Nov. 2019, 00:38] [Comments: 0]
[Send via e-mail] [Print version] [ASCII version]

15.Nov.2019

Hardware extension: "A314" adds internal Raspberry Pi to A500
Niklas Ekström has developed a FPGA-based adapter board which allows you to connect a Raspberry Pi to the internal extension port of the Amiga 500. The Verilog source code, the source codes of the Amiga and Linux software as well as the design for the "A314" board are available at Github under a free license.

The Raspberry Pi makes 0,5 or 1 MB of its main memory available to the A500 depending on the used Agnus revision as chip or slow RAM. Both computers access this memory for exchanging data. Additionally there is a communication channel which both systems can use for poiting out to incoming data. A battery backed real time clock the A314 emulates as well. What tasks the software is to handle :

a314fs: is a file system that is mounted in AmigaDOS as a device, PI0:.
pi: is a command that lets you invoke executables on the RPi from the AmigaDOS CLI. For example, if your current working directory is on PiDisk: and you run "pi vc hello.c -o hello", then the vc program (the VBCC cross-compiler) is executed on the RPi with the given arguments. It will cross-compile "hello.c" into the Amiga executable file "hello". The resulting binary is immediately accessible through the a314fs.
PiAudio: lets the RPi stream audio samples directly to the shared chip memory, from where Paula plays those samples. PiAudio is integrated with ALSA on the RPi so that any program that plays audio through ALSA can be used, i.e. "pi mpg123 -a amiga song.mp3" plays song.mp3 using the program mpg123 to the Amiga.
VideoPlayer: is a simple program that displays a sequence of images on the A500 by letting the RPi write bitplanes directly to the shared memory (this again requires that the A314 memory is chip memory, and not "ranger" memory).
RemoteWB: works by moving the Workbench bitplanes over to the chip memory on the A314. This requires that the A500 has at least a 8372 Agnus. During drawing of each frame on the Amiga, the RPi reads those bitplanes, encodes them into a GIF image, and transmits that image to a web browser through a web socket. The web browser in turn, returns key presses and mouse movements back to the Amiga through the same web socket. In effect, this becomes a web browser based remote control application, comparable to VNC but with near zero performance impact on the Amiga CPU!

In future Networking is planned either through a bsdsocket.library implementation that forwards socket operations to the RPi and executes those operations there (high degree of offloading), or a Sana II driver used with a full network stack (lesser, but still offloading). (cg) (Translation: dr)

[News message: 15. Nov. 2019, 00:19] [Comments: 0]
[Send via e-mail] [Print version] [ASCII version]

1 90 175 ... <- 180 181 182 183 184 185 186 187 188 189 190 -> ... 195 527 865