amiga-news.de - Archive

Archiv 'New hardware and software products'

`28.Mar.2023` Indie Retro News (website)	Arcade conversion: Shoot'em Up 'Xevious' (Beta) Xevious is a vertical scrolling shoot'em up released by Namco in 1982. Jean-François 'jotd' Fabres is currently working on an Amiga conversion (video), which requires an AGA Amiga. A current beta version can be downloaded from his website for free or for a small donation. (cg) (Translation: snx) [News message: 28. Mar. 2023, 17:03] [Comments: 0] [Send via e-mail] [Print version] [ASCII version]
`27.Mar.2023` Amigans Forum (ANF)	AmigaOS 4: NVMe device driver for SSD Besides his audio driver for Intel HD Audio (amiga-news.de reported), Harald Kanning has now started developing a NVMe device driver for SSDs and has released the first version 53.1 under the title link. As the author explained, "is short for 'Non-Volatile Memory express'. It's basically a transfer protocol for attachment of mass storage to a computer. Unlike SATA, NVMe is specifically designed for solid state flash memory. There is no separate storage controller. Instead, the NVMe SSD is directly connected to the PCIe bus through an M.2 slot. None of the current NG systems offer a M.2 slot directly on the mainboard. But since an NVMe M.2 slot is basically a PCIe x4 slot with a different form-factor, we can use a widely available passive PCIeM.2 adapter card. These adapter cards are available with a PCIe x1 or PCIe x4 connector. Don't use the adapter cards with multiple M.2 slots because they will not work. The driver was tested on an AmigaOne X5000 and in the x4 slot with the following drives: Samsung 970 EVO 1TB WD Black SN770 1TB For this, the developer has provided a few first benchmarks: p50x0SATA.device: Samsung 840 SSD 120GB Copy 1GB file from RAM: to NGFS/01: 51.5MB/s (20.4 sec) Copy 1GB file from NGFS/01 to RAM : 98.9MB/s (10.6 sec) nvme.device: Samsung 970 EVO SSD 1TB Copy 1GB file from RAM: to NGFS/01: 129.5MB/s (8.1 sec) Copy 1GB file from NGFS/01 to RAM : 152.0MB/s (6.9 sec) Copy 1GB file from RAM: to SFS/02 : 327.7MB/s (3.2 sec) Copy 1GB file from SFS/02 to RAM : 233.0MB/s (4.5 sec) (dr) [News message: 27. Mar. 2023, 06:12] [Comments: 0] [Send via e-mail] [Print version] [ASCII version]
`21.Mar.2023`	Managing ADF files: Rust library "adflib" Volker Schwaberow is in the process of converting ADFlib, written by Laurent Clevy mainly in C, into the programming language Rust. As he explained to us when asked, the library is still in a very early stage and still very minimalistic. At the moment it can read and write ADF, it can read and write tracks and sectors in a byte array. There is no support yet for file systems, compression, etc. However, that is the goal. In addition, there will be a command line tool that will allow these operations to be performed on the command line without the need for programming knowledge. The author is happy about support, code commits from third parties are welcome. (dr) [News message: 21. Mar. 2023, 17:43] [Comments: 0] [Send via e-mail] [Print version] [ASCII version]

1 23 40 ... <- 45 46 47 48 49 50 51 52 53 54 55 -> ... 60 461 868