19.Aug.2022
|
Boot Selector for Amiga 600 / 1200 (update)
With a boot selector it is possible to use an externally connected floppy drive (or Gotek Floppy Drive Emulator) as boot floppy. This is made possible by making the Amiga believe that the external drive is DF0:. To avoid soldering and fiddling with wires, there are ready-made solutions of various kinds, but they basically all do the same thing: swap two address lines.
Gotek Retro has now designed its own solution for the Amiga 600 and Amiga 1200 respectively: According to Ed, "the traditional boot selectors for the old(er) generation Amiga's do not fit as they still used a CIA on a socket where they would be installed between the socket and the chip. The Amiga 600 and the Amiga 1200 have exchanged that socket version for an SMD version that requires much less space, but is also not easy to remove / replace.
The principle is very simple , you don't change the data lines ON the CIA itself but on a different location. The bootselector for the Amiga 1200 (And A600) consists of 2 interfaces , one internally between the internal floppy drive and the floppy cable, and the other one externally, connected to the floppy port on the back of your Amiga. The only thing you need to do is bring 2 wires from the internal interface to the external interface."
The boot selector is available in the store for 25 Euro plus shipping. (dr)
[News message: 19. Aug. 2022, 05:49] [Comments: 1 - 19. Aug. 2022, 20:41]
[Send via e-mail] [Print version] [ASCII version]
|
